Samsung Spinpoint
F1
3.5" Hard Disk Drive (HD753LJ)
- Spinpoint F1
- capacity : 750GB
- interface : Serial ATA 3.0Gbps
- buffer memory : 32MB
Better Reliability, Less Energy Consumption
Than Other Options
The Samsung Spinpoint F1 delivers high capacity along with sophisticated recording technology. With its compact, lightweight package and advanced design, the F1 drive offers many advantages for high-density applications compared to using two drives or a four- or five-disk solution. Compared to a five-disk solution, the F1 Series consumes 13-16% less power and provides up to 20% faster performance.
This 3Gbps SATA drive has a maximum of 334GB of formatted capacity per disk while also featuring Samsung’s industry-leading NoiseGuardTM and SilentSeek™, technologies to eliminate acoustic noise. The Spinpoint F1 utilizes Samsung-developed perpendicular recording technology, which helps the drive set new records in both areal density and platter capacity.
Reliability Beats Competition
The Spinpoint F1 requires fewer components than competing solutions with four or five disks. With fewer heads and disks, the F1 statistically has a lower probability of headdisk failures. According to estimates, this Samsung drive has a 50% lower failure rate than a two-drive solutions and as much as 31% fewer failures than five-platter drives.
Special Features for High-density Applications
For consumer applications, a power-saving code reduces power consumption while AV-optimized firmware cuts time delays during AV data recording. In general, the Samsung drive offers a superior combination of density, recording quality and reliability.
Features
- Serial ATA 3.0Gbps Interface Support
- Improved recording stability over temperature with PMR
- Advanced dynamic FOD control for best data integrity
- Intelligent compensation of external disturbance
- SATA Native Command Queuing Feature
- Device Initiated SATA Power Management
- Staggerd Spin-up Support
- Rotational vibration sensor
- Environment friendly product with RoHS compliance
- Improved performance with dual-ARM based firmware
- ATA S.M.A.R.T. Compliant
- ATA Automatic Acoustic Management Feature
- ATA 48-bit Address Feature
- ATA Device Configuration Overlay Feature
- NoiseGuard™
- SilentSeek™
Target Applications
- High-end desktop systems, media servers, and workstations.
Technical Specifications
| Drive Configuration | |
| Capacity | 750GB |
| Interface | Serial ATA 3.0Gbps |
| Buffer DRAM Size | 32MB |
| Byte per Sector | 512 bytes |
| Rotational Speed | 7,200 RPM |
| Performance Specifications | |
| Average Seek time (typical) | 8.9 ms |
| Data Transfer Rate / Media to/from Buffer(Max.) | 175 MB/sec |
| Data Transfer Rate / Buffer to/from Host(Max.) | 300 MB/sec |
| Average Latency | 4.17 ms |
| Drive Reday Time (typical) | 12 sec |
| Reliability Specifications | |
| Non-recoverable Read Error | 1 sector in 10^15 bits |
| Start/Stop Cycles | 50,000 |
| MTBF | 1,200,000 POH |
| Acoustics | |
| Idle | 2.70 Bel |
| Performance Seek | 2.90 Bel |
| Environmental Specifications | |
| Temperature / Operating | 0 ~ 60 °C |
| Temperature / Non-operating | -40 ~ 70 °C |
| Humidity (non-condensing) / Operating | 5 ~ 90 % |
| Humidity (non-condensing) / Non-operating | 5 ~ 95 % |
| Liner Shock (1/2 sine pulse) / Operating | 70 G |
| Liner Shock (1/2 sine pulse) / Non-operating | 300 G |
| Altitude (relative to sea level) / Operating | -300 to 3,000 m |
| Altitude (relative to sea level) / Non-operating | -300 to 12,000 m |
| Power Requirements | |
| Voltage | +5V±5%, +12V±10% |
| Spin-up Current (Max.) | 2.4 A |
| Seek (typical) | 8.6 W |
| Read/Write (typical) | 7.9 W |
| Idle (typical) | 7.7 W |
| Standby (typical) | 0.8/1.2 W |
| Sleep (typical) | 0.8/1.2 W |
| Physical Dimensions | |
| Height (Max.) | 26.1 mm |
| Width | 101.5 mm |
| Length | 147.0 mm |
| Weight (avg.) | 640 g |