| Logic Board |
Ports |
Power |
| Processor: |
G4, 700, 800MHz |
| PMMU: |
integrated |
| FPU: |
|
| Data Path: |
64-bit |
| L1 Cache: |
64k |
| L2 Cache: |
256k |
| 2nd Processor: |
n/a |
| Slots: |
0 |
|
| USB: |
3 |
| ADB: |
Via 3rd Party |
| Video: |
Built-In |
| Floppy: |
none |
| SCSI: |
Via 3rd Party |
| Geoports: |
n/a |
| Ethernet: |
10/100 Base T |
| FireWire: |
2 |
| Mic Type: |
Built-In |
| AirPort Ready: |
Yes |
| Other Ports: |
Speaker,
Headphone,
|
|
| Max Watts: |
130 |
| Amps: |
|
| BTU per Hr: |
444.6 |
| Voltage: |
90 to 26 4V |
| Freq Range: |
47 to 63 Hz |
| Battery Type: |
|
|
| Memory |
Video Memory |
| Logic Board: |
None |
| RAM Slots: |
2, 2" Maximum Height |
| Min - Max RAM: |
128 MB - 1 GB |
| Min RAM Speed: |
PC133 |
| RAM Sizes: |
128, 256, 512 |
| Install in Groups of: |
1 |
|
Notes: 32MB of dedicated Double Data Rate (DDR) video memory
Three flicker-free screen resolutions: 640 by 480 pixels, 800 by 600 pixels, and 1024 by 768 pixels (optimum resolution)
24-bit true color at all resolutions for displaying millions of colors |
| Physical |
Software |
Storage |
| Introduced: |
1/17/2002 |
| Discontinued: |
n/a |
| Form Factor: |
iMac (Flat-Panel) |
| Gestalt ID: |
|
| Weight (lbs): |
34.7 lbs. |
| Dimensions (in): |
12.95 x 15.1 x 10.6 |
|
| Addressing Modes: |
32-bit |
| Orig SSW: |
Mac OS X 10.1 |
| Orig Enabler: |
|
| ROM ID: |
|
| ROM Ver: |
|
| ROM Size: |
|
| AppleTalk Ver: |
|
Mac OS
Supported: |
X |
|
| Floppy Size: |
Via 3rd Party |
| Floppy Inject: |
n/a |
| Min. Int HD Size: |
60.0 |
| Int HD Interface: |
ATA |
| Orig CD Speed |
24x |
| Int CD Support: |
Yes |
|
OWC NOTE: There has been confusion about the type, and sizes of memory available to install in iMac Flat Panel systems. The only memory slot that is user accessible is the SO-DIMM memory slot located on the bottom of the computer. This memory slot can accomodate any PC-133 SO-DIMM up to 2" in height. For more information about this issue, see this Apple Developer Note. While it is possible to upgrade the PC-133 SDRAM chip inside the computer, an upgrade of this type requires a qualified service person to perform, and we do not recommend end users to do so. It also voids the Apple warranty on the system.
To install any SO-DIMM in the iMac Flat Panel, first remove the AirPort card (if equipped with one), and install the SO-DIMM as per the instructions provided HERE. Once the memory is installed, reinsert the AirPort card, placing the antenna cable on top of the memory and re-assemble the system.
Photo & Specifications courtesy of Apple Computer, Inc.
|
