Processor / Memory
- One 2.26GHz or two 2.26GHz, 2.66GHz, or 2.93GHz Quad-Core
- Intel Xeon 5500 series "Nehalem" processors
- 8MB shared L3 cache per processor
- Three-channel integrated memory controller per processor
- Hyper-Threading support with two threads per core (up to 16 virtual cores)
|
- Turbo Boost for increased performance under dynamic workloads (up to 3.33GHz on a 2.93GHz processor)
- QuickPath Interconnect
- 128-bit SSE4 SIMD engine
- 64-bit data paths and registers
- Energy efficiency optimization
|
- 1066MHz DDR3 ECC memory
- Six DIMM slots (quad-core) or twelve DIMM slots (8-core) configurable to up to 48GB of SDRAM
- System supports up to 96GB in Mac OS X Server v10.6
|
Internal Drives
- Three independent hot-plug
drive bays with support for qualified SATA or SAS drives
- Support or up to 3TB of hot-plug internal storage using the following drive modules:
- 160GB 7200-rpm SATA drive with 8MB disk cache
- 1TB 7200-rpm SATA drive with 32MB disk cache
- 2TB 7200-rpm SATA drive with 32MB disk cache
- 450GB 15,000-rpm SAS drive available as a third-party kit
|
- Xserve drive bays support Apple-qualified drive modules with Apple-qualified hard drives and firmware only. Drive bays not configured with a qualified drive module ship with a nonfunctional blank drive carrier and do not support installation of nonqualified third-party hard drives.
- Support for reading SMART data from Apple Drive Modules for prefailure notification Software RAID 0 and 1 built into Mac OS X Server
- Optional 128GB solid-state drive Optional Xserve RAID Card with 512MB cache and 72-hour cache battery backup; support for RAID 0, 1, and 5
- 8x SuperDrive DL (DVD±R DL/DVD±RW/CD-RW)
|
Hard drive upgrade: Xserve requires 1.5Gb/s SAS or SATA HDD under 2.2TB. No longer available through OWC.
|
|
Ports
- Two FireWire 800 ports on back panel; 15W total power
- Two USB 2.0 ports (480Mb/s each) on back panel; and one USB 2.0 port on front panel
|
- One DB-9 serial port (RS-232)
|
Rack support
- Fits EIA-310-D-compliant, industry-standard four-post racks and cabinets: 19 inches wide, 24 to 36 inches deep
|
- Front-to-back cooling for rack enclosure
|
- Support for square-hole racks or threaded racks based on mounting kit selection
|
Power
- Output power: 750W
- Optional second load-sharing 750W power supply for redundancy
- Line voltage: universal input (100V to 240V AC), power factor corrected
|
- Maximum input current: 8.0A (100V to 120V) or 4.0A (200V to 240V); current is shared when system is configured with two power supplies
- Frequency: 50Hz to 60Hz, single phase
- Operating temperature: 50° to 95° F
(10° to 35° C) |
- Storage temperature: -40° to 116° F
(-40° to 47° C)
- Relative humidity: 5% to 95% noncondensing
- Maximum altitude: 10,000 feet
- FCC Class A approved
|
Network
- Two independent 10/100/1000BASE-T (Gigabit) RJ-45 Ethernet interfaces with support for jumbo frames
|
Expansion
- Two open PCI Express 2.0 x16 expansion slots:
- One half-length (6.6-inch)
- One 9.25-inch length
|
- Dual-Channel Gigabit Ethernet PCI Express Card
- Dual-Channel 4Gb Fibre Channel PCI Express Card
- Quad-Channel 4Gb Fibre Channel PCI Express Card
|
Graphics / Video
- NVIDIA GeForce GT 120 graphics with 256MB of GDDR3 memory and Mini DisplayPort output
|
- VGA output using Mini DisplayPort to VGA Adapter (sold separately)
|
- DVI output using Mini DisplayPort to DVI Adapter (sold separately)
|
Dimensions / Weight
Height: |
1.73" |
(4.4cm) |
Width: |
17.6" |
(44.7cm) |
Depth: |
30" |
(76.2cm) |
Weight: |
38.3lb. |
(17.4 kg) |
- Width for mounting in standard 19-inch rack
- 30.8 lb. (14.0 kg) - Base
- 38.3 lb. (17.4 kg) -
for 8-core system with twelve DIMMs, three 1TB SATA Apple Drive Modules, and two power supplies