Why does my solution not show up when using Windows 2000 / XP? (0)
Can I add more drives to an existing RAID array with the QX2? (0)
Can I boot from my Qx2? (0)
Can I daisy chain off the QX2? (0)
Can I hook up the QX2 to multiple machines at once? (0)
Can I repartition my drive without waiting for it to rebuild? (0)
Can I use different sized hard drives with the QX2 when using 2 or 4 drive spanning? (0)
Can I use the QX2 cross platform? (0)
Do you have an estimate of the cost to repair key components of the QX2 which could fail outside of warranty? Namely: 1) RAID co (0)
Do you supply replacement keys for the front cover of the QX2? How much do they cost? (0)
Does OWC offer a service contract for on-site repair of the QX2? (0)
Does the fan inside the QX2 use sleeve bearings or ball bearings? (0)
Does the Icy Dock 2.5" to 3.5" SATA/SSD Converter Tray (ICDMB882SP1S1B) work with the OWC Qx2? (0)
Does the QX2 have any form of vibration isolation to inhibit the acoustic coupling between the four drives. (0)
Does the QX2 support hot swapping? Is it correct that the entire unit must be shut down before a single drive can be replaced? (0)
Does the RAID controller on the QX2 attempt to manage the drive heads in such a way as to minimize violent travel of the read/wr (0)
How many drives can fail in my QX2 before I lose my data? (0)
How much space will I have if I use the QX2 in RAID 5 mode? (0)
How much space will I have if I use the QX2 in RAID 5 w/ spare mode? (0)
I am trying to format my QX2, but it????????s not showing in Disk Management. (0)
I can not get my Qx2 to limit the drive size to 2TB. (0)
I can't get my QX2 to work correctly with my Highpoint 2314 card. What am I doing wrong? (0)
I had a drive fail on my QX2. What is the proper procedure to install the new drive to ensure no data is lost? (0)
If a regular drive in, say, RAID 5 configuration fails and is replaced, how long does it take the QX2 to rebuild the parity driv (0)
If the fan in the QX2 dies, does the unit self-detect and shut down gracefully before there is heat damage to the drives or RAID (0)
If the fan on the QX2 does fail, and the user suspects drive damage, what is the OWC policy on the return of the whole unit? Nam (0)
Is the QX2 more or less susceptible to a power surge than, say, a Mac with the same drives? (0)
My PC recognizes that the QX2 is plugged in, but it doesn????????t show under My Computer? (0)
RAID 5 offers both redundancy and speed. Why don't you recommend doing RAID 5 with the QX2 for video editing? (0)
Similar RAID systems use a cache for high throughput. Is that true for the QX2? The old Apple Xserve/RAID had a battery backup (0)
The fan in the QX2 appears to pull air through from the front -- where there could be metal shavings (from the thumb screws to s (0)
What are the QX2's recommended limits for operational and ambient temperature? (0)
What block size does your OWC Mercury Elite Pro Qx2 use? (0)
What configurations on the QX2 are recommended for video editing? (0)
What is the A-B switch for on the back of the QX2? (0)
What is the rating of the hard disks supplied in the QX2? Not just in MTBF, but the "class" of the drives. For example, in the (0)
What RAID levels does the QX2 support? (0)
What type of speed can I expect to get from the QX2? (0)
What???s the difference between the RAID levels that the QX2 uses? (0)
When the Qx2 is set as a RAID 10 array, which drives are mirrored & striped? (0)
Which cards can I use with the QX2? (0)
Why am I getting the error message ???Invalid Reques" when I try to format my Qx2? (0)
Why can???t I see additional devices down the chain when connected to my OWC hard drive? (0)
Why does the LED indicator for some of the drives light up red? (0)
Why won't my external drive work properly over FireWire in Windows 7? (0)
Will the hard drives spin down when my computer goes to sleep or stand-by mode? (0)