AEC-6293M
1-ch eSATA/ 1-ch SATA/ 1-ch IDE Adapter

Upgrade to the ultimate in hard drive compatibility.

Do you have a PowerMac G4 that doesn't have SATA compatibility but would like to use the latest and greatest drives in your machine? Or an IDE drive that can not be installed in your PowerMac G5? Maybe you'd like to add an external RAID tower via eSATA, but alas your Mac does not have the port? With the AEC-6293M, now you can.

Add One of each port using this one card:

• Internal Serial ATA (SATA)
• External Serial ATA (eSATA)
• Internal Parallel ATA (ATA/PATA/IDE)

ACARD AEC-6293M is a 32-bit/66MHz, 1-ch eSATA/1-ch SATA/1-ch PATA and high-performance PCI to SATA II / PATA card for Mac computers with an available PCI slot running Mac OS X 10.4 or later. Within ACARD's latest cutting-edge single chip, the speed of its SATA ports can reach 1.5Gbps.

Features

• Data transfer rate up to 1.5Gbps
• Supports SATA II port multiplier
• Supports ATAPI Devices
• Low-profile form design

Specifications

• ACARD Chip: ATP8620
• PCI Bus
  • Supports 32-bit/66MHz, PCI Bus Master
  • PCI bus data transfer rate up to 266 MB/s
• SATA Device
• Compliant to SATA II specifications
• SATA ports Data transfer rate up to 1.5Gbps each port
• One 7-pin eSATA port for eSATA device, One 7-pin SATA port for SATA device
• Supports ATAPI Devices
• Supports port multiplier
• External SATA: One LED on bracket, Internal
• SATA: Supports pin-out for HD LEDs
• Supports 48-bit LBA addressing with Big Drive technology
• PATA Device
• Supports up to 2 Ultra ATA Devices (Master/slave)
• Up to 133MB/sec Data Transfer Rate In Ultra ATA DMA Mode
• Supports ATAPI Devices

OS Compability

• Mac OS X 10.4 or above

Spec Parameters

• Temperature:
  • Operation: -20°C to 60°C
  • Non-operation: -20°C to 60°C
• Humidity: 0% to 60%
• Size: 14 cm(L) x 6 cm (W)

1.5.3 Connectors

• One 7-pin eSATA connector
• One 7-pin SATA connector
• One 40-pin IDE connector