• Supports true Hardware RAID 0 (Striping), RAID 1 (Mirroring)
• Capable Booting from standard and RAID volume

Features

• True Mac OS X support
• A standalone PCI-to-IDE RAID controller
• At a normal mode as IDE devices extension
• OS X, OS 8.5, OS 9 all on same firmware
• Designed for G4, G3, 9x00, 8x00 and 7x00 PowerMac Systems
• Supports capacity larger than 137GB Hard disk

Specifications

• DIP Switch setting for RAID 0 mode, RAID 1 mode or normal mode
• Coexist with on-board IDE controller
• Open Firmware interface
• Max. 4 IDE devices

PCI Bus

• 32-bit PCI Bus Master for up to 133MB/s data transferring rate
• Scatter / Gather function support
• Automatic FIFO threshold selection
• Low command overhead
• True PCI Plug and Play

IDE Bus

• Dual independent channel of IDE bus
• Supports Ultra ATA133/100/66/33 hard disk
• Supports 48-bit addressing with Big Drive technology
• Data transfer rate up to 133MB/sec per channel

OS Compatibility

• Mac OS X
• Mac OS 8.5, OS 9 and higher

Device Compatibility List - Subject to change without notice.

At this time, all CD, CD-R, CD-RW drives are compatible.

Also, at this time all Hard Drives are compatible.