Refer to these steps and the above pictures to properly package your Modbook:
1. Place the laptop in the provided anti-static bag and fold it over/around once.
2. Place one of the 101/2" x 83/16" pieces of gray foam in the bottom of the box.
3. Remove one piece of the white foam liner from each side (left and right) of the box.
4. Place the laptop in the box and securely wedge it between all four edges of the white foam liner.
5. Place the second piece of gray foam on top of the laptop.
6. Close the box and tape the front lid shut.
7. Tape around box by going across the middle of the box from left to right twice,
    going all the way across the edge seams around the box. (See 7a and 7b)
8. If you do not have tape, please use the provided 25-sheet to secure the seams.
9. Place the provided shipping label in the upper right-hand corner of the box.