Experience local shipping options and optimized product inventory for your region.
We're sorry, but this item is no longer for sale. However, there may be more Expansion Cards items available.
We recommend NewerTech MAXPower 2x2 USB + eSATA 6G PCIe Expansion Card (Mfr P/N: MXPCIE2E2U3) from Newer Technology for $124.99 as a suitable alternative.
Calldigit should exchange these models with the new version that just came out in February 2014 or to send an efficient updating firmware to all its customers.
I would recommend this item to a friend!I also have an external 4 SATA drive enclosure that I've been wanting to use. I did not see specifically if this supported multiplexing, but I can tell you for a certainty now that it does without any issue. I had 4 1TB drives in the box, hooked them up, went into disk manager and setup a stripped array. 2 or 3 minutes later all was good in the hood bro.
Black Magic tested the external array at 177 write and 155 read. Not quite good enough for HD video editing, but certainly fast enough for storing all those large events that tie up my dual SSDs.
My only complaint is that I didn't by 2 of them to begin with.. I need to go place another order for my other mac in the office.
Thanks OWC for getting what we need at a price that affordable.
Cheers Rick in AZ
I would recommend this item to a friend!The CalDigit documentation/advertisement is, if not false, then incomplete. It lists the maximum speeds of USB 3.0 (5 Gb/s) and eSATA 6G (6 Gb/s) but it does not say what the maximum bandwidth to the computer is from those ports (given an infinite speed USB or eSATA device).
The card uses the following chips: - PLX PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch. 4 PCIe 1.0 or 2.0 lanes to the computer, 1 PCIe 2.0 lane to the USB controller, 1 PCIe 2.0 lane to the SATA controller. - Marvell 88SE9123 PCIe SATA 6.0 Gb/s controller - 2 SATA ports, 1 PCIe 5.0 lane to the switch chip. - NEC uPD720200 USB 3.0 Host Controller - 2 USB 3.0 ports, 1 PCIe 5.0 lane to the switch chip.
400 MB/s should be achievable from USB 3.0 with 800 MB/s for two USB 3.0 ports. However, the controller chip is limited by a single PCIe 2.0 lane to 500 MB/s max.
eSATA 6G should be able to get 600 MB/s with 1200 MB/s for two SATA ports. However, the controller chip is limited by a single PCIe 2.0 lane to 500 MB/s max. That's not fast enough to obtain maximum speed from even one eSATA port. The 6 Gb/s max transfer rate they advertise is unattainable, even theoretically.
CalDigit could have made this a two lane card, since the controllers only need one lane each, but two lane cards are treated as one lane cards in some PCIe slots even on some newer PCs. That's something the makers of 2 lane cards like the Mercury Accelsior should have considered...
Fast SSDs (e.g. OWC's 6G SSDs) or RAIDs that can achieve more than 400 or 500 MB/s would be wasted on this card. It works very well for slower drives though. I haven't found many benchmarks that go higher than 250 MB/s. One person noted read speeds of 370 MB/s from an OWC 6G SSD connected to an eSATA port with a RocketStor 5322. Another person said a CalDigit tech support person said the max performance was 250 MB/s due to the PLX chip. Maybe that's why they don't have benchmarks...
None of those speed concerns affect me since I use the card in a PCIe 1.0 slot and use a single USB 3 port to attach a 2.5" hard drive for 114 MB/s. That is the maximum speed of the drive and is better than FW800 so I'm happy.
I use Mac OS X 10.8.2 Mountain Lion. The USB 3.0 ports require drivers to be installed. The eSATA ports do not. The included CD had the latest CalDigit USB drivers. The hard drive appears in System Profiler under the new USB Super-Speed Bus. The drive speed says "Up to 480 Mb/sec" but this is false since it definitely goes much faster than that.
The card can bus-power the portable hard drive. The card doesn't maintain connection to the hard drive when the computer goes to sleep so I recommend not using sleep. I don't know if that's a problem with the driver or with USB 3.0 PCIe cards in general.
I would recommend this item to a friend!The card reads my USB 3.0 external drives just fine. Unlike the other card I replaced which has 4 ports, this one handles my external drives as actual USB Super Speed (3.0) drives and they perform faster. The most important thing about this, and the main reason why I was willing to sacrifice 2 additional USB 3.0 ports was because I have a RocketFish external USB 3.0 enclosure which has to additional USB 3.0 ports and a CF/MD/MS/SD/MMC/XD card reader in the front. To my surprise, this Caldigit card read it, no problems at all. The other card which I replaced did not. Plus I have the option of plugging in eSata drives if I want to . So, do I recommend it? YES!
On a separate note, I contacted their Support team to obtain the latest drivers. I had to send them an email with the serial number of the card. I got a response back in like 7 minutes.
I would recommend this item to a friend!