Highest capacity and reliability with a proven design

The DeskstarTM 7K2000 hard drive delivers a colossal two terabytes of storage capacity and 7200 RPM performance in a standard 3.5-inch form factor. Now in its fourth-generation, the 7K2000 is based on a robust mechanical design that continues to set the industry standard for quality and reliability. Through a patented ramp load/unload design, data heads are moved to a ramp away from the disk where they rest during periods of inactivity. This greatly minimizes the risk of shock damage by eliminating direct contact between the heads and disks, reducing wear and heat while improving overall drive reliability and power efficiency. The Deskstar 7K2000 also incorporates thermal fly-height control (TFC) technology which uses an integrated heating element to precisely maintain a constant fly-height throughout read and write operations to enhance overall data integrity, drive performance and reliability. The 7K2000 features industry-standard native 512-byte sector formatting, ensuring compatibility with mainstream computing environments.

Outstanding energy efficiency

The Deskstar 7K2000 offers an exceptional blend of capacity and power efficiency, with idle power savings over previous generation products up to 10%. On a watts per gigabyte basis, idle power has improved over 120%. Leveraging eighth-generation power management technology, including power-saving innovations like HiVERT™ technology, this drive delivers best-in-class power management and thermal emissions to help manufacturers meet energy compliance targets and extend drive life.

Innovation for a more sustainable environment

The Deskstar 7K2000 demonstrates Hitachi ecological leadership with its halogen-free design and power-efficient operation. Both these features helped qualify the drive for the Hitachi EcoTrac classification, which identifies products that minimize environmental impact in the areas of product design, manufacturing, operation and disposal.

Deskstar™ 7K2000 Specifications

"Dual Interface" Docking Solutions

Whether you're on a data recovery mission or just want to check the contents of an older swapped out hard drive, NewerTech Voyager is the easiest, most convenient way to access data from any Serial ATA (SATA) hard drive.

Just insert any standard 2.5" or 3.5" SATA I/II hard drive with up to 2.0TB capacity into the compact docking base and select one of the interfaces supported by your Mac® or PC for the fastest data transfer performance. Then, start reading and/or writing data to the docked hard drive. There’s nothing else to install or configure!

Saves Time & Money
With its Plug and Play design, the NewerTech Voyager saves you the time of installing a hard drive into a computer or the cost of an external enclosure. Now you can think of bare SATA drives with the same convenience and instant access benefits as flash memory cards…but with huge gains in storage capacity!

Hot-Swap Ready
Have multiple hard drives you need to access? No problem, NewerTech Voyager’s unique design makes hot-swapping SATA hard drives a breeze*. When finished using your drive, simply pull up on it or use the eject lever for 3.5" drives for quick and effortless removal.

Ideal Solution For Photographers & Videographers
Instead of needing multiple enclosures and power supplies for every archived hard drive, NewerTech Voyager makes accessing your valuable hard data a breeze. Just slide in your hard drive, find the desired image or clip, and then return the hard drive to your storage safe.

Truly Plug and Play
With all supported interface connector cables included, an auto-switching power supply for worldwide compatibility, and flexible operating system compatibility, the NewerTech Voyager can travel your data universe with ease.

Features

• Supports all 2.5" and 3.5" SATA I/II hard drives up to 2.0TB
  
• "Dual Interface" for maximum data transfer rates and system compatibility
  
• Data transfer rates up to 3.0Gb/s (300MB/s)
  
• Hard drive eject lever for safe removal of 3.5" drives
  
• Hot-Swap functionality for fast access of multiple hard drives*
  
• Weighted base and non skid rubber feet for stable operation
  
• Status LED:
  Blue = Power
  Flashing Red = Disk Activity
• Compact design…measures 3.937" x 5.95" x 3.169" inches
• Whisper Quiet operation…no cooling fan needed
  
• Plug and Play with Macs and PCs
  
• All interface connection cables included
  
• RoHS Compliant
  
• One year warranty
  
• CE approved

Transfer Rates

• eSATA: up to 3.0Gb/s (or 300MB/s)
• USB 2.0: up to 480Mbps (60MB/s)

Specifications

Bridge Chipset	Jmicron 20336
Features	Status LED: Blue = Power Flashing Red = Disk Activity RoHS Compliant FCC, CE approved
Material	ABS black plastic with non-skid rubber feet
Interface/Ports	(1) eSATA port (1) USB 2.0/1.1 Mini-B port
Power Supply	External Auto-Switching US/Intl. UL Listed 100-240V AC/ 50-60Hz, 12V/2A Output
Dimensions and Weight	3.937" x 5.925" x 3.169" (W x D x H) 1.32 lbs. (without drive)
Warranty	One year warranty
Compatibility	Macintosh Requirements: Macintosh OS 8.6 to 9.2.2, OS X 10.2.x or later, and an available USB or eSATA port. Windows Requirements: Windows Vista, XP, 2000, NT, 98, and an available USB or eSATA port.

Ports & Accessories