Qx2 (All): Replacing a Failed RAID Drive

Created on: May 24, 2013
Last updated: April 1, 2016

If one of the drives in your Qx2 has failed, OWC recommends you replace that drive with a new drive of identical make, model, capacity (and if possible) firmware. The process for doing this is covered in detail in your user manual.


USB 2.0 Version - http://eshop.macsales.com/tech_center/manuals/mercury_elite/OWC_Merc_Elite_Qx2.pdf

USB 3.0 Version - http://eshop.macsales.com/tech_center/manuals/mercury_elite/OWCMANMEQX3_R6W.pdf