Free Shipping available on most orders $49.00 & up.

Get Details. »

We're sorry, but this item is no longer for sale. However, there may be more Misc Storage Accessories » Cables, Accessories & Mounting Kits » Drive Mounting Kits items available.


Neutrino Bridge

The Neutrino Bridge is a two in one product designed to hold a single 2.5" drive. It is both a 2.5" to 3.5" drive adapter with a regular internal SATA interface as well as a next generation USB 3.1 Gen 2 (10G) drive when connected externally. Quickly and easily accessing the data on an SSD has never been easier and faster than with this dual interface drive adapter.
SuperSpeed USB 3.1 Gen 2 (10G)
The SuperSpeed USB 10 Gbps (USB 3.1) specification adds a 10 Gbps speed mode that uses a more efficient data encoding and will deliver more than twice the effective data through-put performance of existing SuperSpeed USB. At the same time, especially with the regular USB 3.0 Micro-B connector that is used in the Neutrino Bridge, it is still fully backwards compatible with existing 5 Gbps USB 3.0 devices and cables as well as USB 2.0 products.
To achieve the best possible transfer rates, make sure that the host computer supports the new USB 10 Gbps (USB 3.1 Gen 2) specification and use a short cable under 50 cm.
2.5" to 3.5" Drive Adapter
Many external hard drive enclosures are designed for the larger 3.5" desktop drives and have no mounting options for the smaller 2.5" drives. With this 2.5" to 3.5" drive adapter, you can now install your SSD or laptop drive in any device or drive slot designed for desktop drives, making it possible to use your existing equipment without having to buy a separate hard drive enclosure.
SSD Reader
For those that need quick access to the data on an SSD, say to backup the footage from a Blackmagic Cinema Camera or Production Camera 4K, the Neutrino Bridge can also be used as an SSD reader. All you need to do is slide in the SSD, connect it to your computer via USB and you can edit the footage right away by using bus power alone.

Product Specifications:

AKiTiO Part Number



  • Aluminum


  • To achieve the best possible transfer rates, make sure that the host computer also supports USB 3.1 (10G).
  • Any regular USB 3.0 cable with a Micro-B plug can be used but for maximum performance we recommend using a short cable under 50cm.


  • Height: 10 mm (.4 in)
  • Width: 5102 mm (4.0 in)
  • Length: 147 mm (5.8 in)
Manufacturer provided specifications for AKiTiO p/n NEUB-U3AB-AKT UPC#: 888038001196



  • Neutrino Bridge
  • Setup Guide
AKiTiO Neutrino Bridge Mfr P/N: NEUB-U3AB-AKT OWC SKU: AKTNEUBU3AB Two and one product, supports 2.5-inch SATA Solid State and Hard Disk Drives. Serves as both a 2.5-inch and 3.5-inch drive adapter with an internal SATA interface. Backwards compatible with USB 3.0 and USB 2.0 devices. 2 Year AKiTiO Limited Warranty
Sold Out