64.0GB OWC Memory Upgrade Kit
4 x 16.0GB PC10600 DDR3 ECC 1333MHz 240 Pin
Matched set, perfect for the Mac Pro 12-core / 8-core Xeon systems!
OWC Memory for Mac Pro Quad Xeon fully meets Apple's specifications with special attention to proper thermal specifications.
IMPORTANT OWC NOTE:
OWC p/n OWC1333D3MPE8GB (8GB modules) and OWC1333D3MPE16G (16GB modules) require that all installed modules be of the same p/n OWC 8GB and/or 16GB modules. Other existing Apple or 3rd party 1GB, 2GB and 4GB modules are not supported for use with these kits and need to be removed when these modules are added.
To utilize over 32GB of memory in your Mac Pro using 10.6.x or greater, you must boot into 64 bit mode. In 32 bit mode, all installed memory will show in system profiler but only up to 32GB will be actively used by the computer.
This kit is compatible with dual processor (8-core & 12-core) Mac Pro models ONLY. While single processor (Quad and 6-core) Mac Pro models do have 4 memory slots available, This kit is not compatible due to an OS system limitation.
From the purchase date of qualifying memory from OWC, you have 60 days to trade-in your old memory for a cash rebate!
Just fill out OWC's online rebate form
or contact OWC Customer Service
after you receive and install your new memory.
*About the Apple Specified Thermal Sensor:
Ensuring maximum performance, reliability, and operational feedback - all OWC DDR3 ECC Modules for the Apple Mac Pro 'Nehalem' process models feature utilization of Apple qualified components including the inclusion of the Apple qualified Thermal Sensor EEPROM.
Memory modules may differ in appearance from those pictured.
Mac Pro 12-Core (Mid 2012)
Model ID: MacPro5,1
2.4GHz, 2.66GHz, 3.06GHz
Mac Pro 8-Core (Mid 2010)
Model ID: MacPro5,1
Compatible with Intel / AMD Process based PCs capable with
the specifications listed above. Memory complies with JEDEC
Specifications, document JESD79-3B.