2.0TB RE4 Enterprise Class Hard Disk Drive
3.5-Inch | SATA 3.0Gb/s | Variable RPM | 64MB Cache
Faster and greener
With improved performance, lower power consumption and higher capacity, this new generation of WD RE-GP drives provides even lower cost-of-ownership to organizations with large data centers.
This new generation of Western Digital RE-GP drives takes advantage of the performance improvements offered in the Western Digital RE3 family of drives and adds advanced power management technology to deliver a faster, greener solution for large-scale data centers.
Faster - 64MB cache, dual processors, and increased areal density yield twice the processing power results in up to 25% performance improvement over the previous generation.
Greener - Improvements in our power-conserving technologies - IntelliSeek, IntelliPark, and IntelliPower - deliver improved power consumption over our previous generation of WD RE-GP drive.
Improved rotary vibration tolerance - Advanced mechanical optimizations along with system characterization and validation provide the highest performance under vibration conditions of any WD product.
Lower total cost of ownership - Large data-hungry organizations such as financial institutions and web service providers may realize up to $10 savings per drive per year in electricity costs (U.S.). A large data center with 10,000 drives could realize up to $100,000 in saving per year.
24x7 reliability - With 1.2 million hours MTBF, these drives have the highest available reliability rating on a high-capacity drive.
IntelliPower - A fine-tuned balance of spin speed, transfer rate, and caching algorithms designed to deliver both significant power savings and solid performance. Additionally, GreenPower drives consume less current during start up allowing more drives to spin up simultaneously resulting in faster system readiness.
IntelliSeek - Calculates optimum seek speeds to lower unnecessary power consumption, noise, and vibration.
IntelliPark - Delivers lower power consumption by automatically unloading recording heads during idle to reduce aerodynamic drag, and by disengaging read/write channel electronics.
Active Power Management - WD drives with GreenPower Technology monitor work load and automatically invoke idle mode whenever possible to further reduce unnecessary power consumption. Drive recovery time from idle mode is less than one second, providing seamless power management between the drive and the host controller.
Perpendicular Magnetic Recording (PMR) - Employs PMR technology to achieve even greater areal density.
StableTrac - Secures the motor shaft at both ends to reduce system-induced vibration and stabilize platters for accurate tracking, during read and write operations.
RAID-specific time-limited error recovery (TLER) - Pioneered by WD, this feature prevents drive fallout caused by the extended hard drive error-recovery processes common to desktop drives.
Rotary Acceleration Feed Forward (RAFF) - Optimizes operation and performance when the drives are used in vibration-prone multi-drive systems such as rack mounted servers.