Experience local shipping options and optimized product inventory for your region.
Jumper Settings Courtesy of OWC Caution: Use at you OWN risk Below is a list of jumper setting you can use on your BLUE AND WHITE G3 / G4 "Yikes" Motherboard. OWC recommends using extreme caution when attempting to overclock your ZIF processor. Some indications of too high a clock speed are instability, crashing, video artifacts, no video, no start chime. S = Jumper x = NO Jumper Note: Jumper #1 starts on the inside of the pin row. (Facing toward the motherboard) The most common settings have been boldfaced.
|