PowerTower Pro Motherboard |
September, 15, 2003 9:09 AM |
barryearly |
I also have a PowerTower Pro that I tried to upgrade and for some reason will not even boot. I get power, the hard drive spins for a second and than nothing. I am sending the board out to allmac.com to have them test it. Any ideas. Thanks. |
. |
RE: PowerTower Pro Motherboard |
September, 15, 2003 3:11 PM |
mjoecups358 |
. |
Sounds like a power supply issue if the drives only spin for a few seconds and then quit... Marty PS My PTP runs very well. (metabox G3/420,Radeon,ATA66acard,atto Ul2d) |
. |
RE: PowerTower Pro Motherboard |
September, 15, 2003 2:39 PM |
brinster |
. |
What processor are you running and what version of X are you trying to install? I learned that 10.2 will only install on G3/G4 processors. |
. |
RE: PowerTower Pro Motherboard |
September, 15, 2003 9:36 AM |
macguruguy |
. |
I'm running on a PowerTowerPro motherboard -- minor problems. |