problem installing so 10.2 |
October, 31, 2002 4:37 AM |
maury |
hello to all i need your help again i tied to install 10.2 and at the first try it has found the installer cd1 and the installation was working but after the reboot there was only a black screen now i tried again to install it formatted the drive ( specs later )started my os9.1 and the xpf copied the normal files to the drive and after he shutted down and restarted he doesn't boot only black screens specs 9600 / sonnet g4-800 radeon 7k 1.2 gb ram scsi disk ( original 4gb ) place to install os 10.2 ide card with 2 disk 1x 40 gb -> osx10.1.5 working well 1x 60 gb -> os 9.1 working well over osx too usb2/firewire card original gfx card 3 screens 2 over the 7k -> working great with osx & so9 1 over orig. card -> works great too over x&9 using xpf2.2.4 ext. cd-rw with the install disc 2 usb mouse logit. can someone inform me how i have to do this it/s better to install 10.2 on the same drive whrer 10.1.5 is running thank a lot for the help will spend swiss chocolate to every person that solve this case please send your address to maury@maury.ch ;-) no joke |
. |
RE: problem installing so 10.2 |
November, 10, 2002 7:56 PM |
OSXGuru |
. |
In some cases, it seems to work better when installing 10.2 to customize the install and leave off the "additional applications". You can always install them from Disc 2 later. For xpostfacto283, have you tried restarting in verbose mode? It would be interesting to see whether you get any messages that might help diagnose things. |
. |
RE: problem installing os 10.2 |
November, 06, 2002 1:53 AM |
maury |
. |
my problem is that the installation works but after the installation i have a black screen i thinked it's why the kernel is the apple one and not the xpf i tried to reload the installed osx ( 10.2 ) over the classic os and still the black screen i checked on the hd ( specs later ) if osx is there and it's like that he has installed but not writted on my disc no osx on the hd i changed the old 4gb disc with a 60gb ata/133 one and now i can't start the osx installation i see that he is copying the mach kernel to the disc and xpf freezzz specs sonnet g4/800 ram 1.28 gb cd original apple scsi / and external cd-rw over usb ide card with 3 connected drives 40/60 - 60 usb-firewire card radeon 7k original mac gfx card no problem with the gfx cards they are working with x and classic os 9.1 osx .1.5 xpf latest vers. thanks for your help |
. |
RE: problem installing so 10.2 |
October, 31, 2002 11:30 AM |
xpostfacto283 |
. |
I had a similar problem installing 10.2 on my machine (7600 with G3/400 upgrade). CD 1 of the installation went fine, and when the machine restarted, the monitor never came back on. I have found that by powering off the machine, then turning it back on, it appears to fix that problem -- the monitor comes back to life. Unfortunately, it runs through part of the startup, then switches to a blue screen and hangs. The cursor is there, and can be moved, but that's it. No apparent reading from the hard drive, nor CD 1. Restarting without CD 1 in the CD tray has the same effect. I've removed the network connection, as others have said this helped them. Otherwise, I seem to be stuck. Anybody else have similar problems, or have any suggestions as to where to look to solve the problem? Thanks, Mike |
. |
RE: problem installing so 10.2 |
October, 31, 2002 5:06 AM |
rampel |
. |
I am trying to install 10.2 on an unsupported machine, a 9600 with a G3 card 500 Mhz, OS 9.2.2 on one partition, X 10.1.5 on another, (obviously both installed with some patching - how else?) I made an install CD for 10.2 and used ASR to copy it to an empty dedicated hard drive. In 9.2.2 It boots - and then a Kernel Panic In X 10.1.5 it boots, I get the first screen, then some scratches on it and nothing more Any advice welcome TIA |