Strange problem with OS X 10.1.5 and XPF 2.2.4 |
December, 08, 2002 11:50 AM |
gchron |
I have a ACARD ATA 133 card with a hard disk with 10.2.2 Also I have Connected a disk at the internat SCSI bus with 10.1.5 The problem is that I cannot reboot with my old 10.1.5 with XPF 2.2.4 The only way that I can reboot there is by rebooting from the SCSI Disk (strange as the IDE and the SCSI disk has the same OS 9.2.2) and reboot from XPF 2.2.3 With XPF 2.2.3 and 2.2.4 cannot reboot to the 10.1.5 when I started from the IDE disk and also I cannot reboot 10.1.5 when I started from the SCSI disk with XPF 2.2.4. When I do something of the bove that I cannot reboot it display that It cannot boot fropm SCSI-INT ther SCSI ID of the disk and some other data at a white screen BEFORE the gray apple is displayed. I think that there a problem with XPF??? |
. |
E: Strange problem with OS X 10.1.5 and XPF 2.2.4 |
December, 10, 2002 8:56 PM |
OSXGuru |
. |
Yes, that's possible. When I can figure these things out, I try to fix them, but it isn't always easy :-) |