Jaguar Install Problems on PM 9600 |
July, 19, 2003 5:16 PM |
jw.holmes |
Greetings, I have a PM 9600 upgraded as follows: 1. Sonnet G3 500 MHZ ( 1MB cache) 2. 640 MB Ram 3. ATI Rage (16MB) Video Card 4. ATTO UW SCSI Card SCSI bus 2 with 2 9 GB UW drives attached Drive ID=2 9GB Drive no SU Disk installed Drive ID=6 9GB Drive with OS 9.2.2 installed 5. Original 4 GB drive on internal SCSI bus 0 ( ID =0) 6. All drives formatted with Intech HD tools 2.5 Attempted to install OS X on 4 GB drive on bus 0. This drive has nothing else on it. I was able to select the drive as the install drive in Xpostfacto and after the machine restarted I ws able to select thet drive in the OS X installer. It said that it was reading files, and then it asked if I wanted to do the standard installation, I selected yes and then a few seconds later it said, "error during installation' and gave me the restart button. I restarted and when it came up on the screen was the universal "Not sign" (circle with a slash through it). I was able to ZAP my PRAM and restarted in 9.2.2. I have attached my log file for your review By the way, the 9GB drive ID=2 on SCSI bus 2 was previously selected as not mount at startup, but when the OS X install disk started the machine up I could hear that that drive spun up. (It is the loudest drive in my machine). Anyway, any suggestions that you might have would be appreciated. Thanks JW Holmes |
|
|