UL2D Cannot use Apple setup or Micronet |
December, 27, 2002 9:46 PM |
jcp171 |
I get "System Error Has Occurred" Immediately. Micronet as I recall gives error "10" IS there some settings I should be using in the Atto 2.8.2 utility to format them in such a way or initialize them in such a way as to allow the Apple Setup to at least load? The drives seem to work fine formatted with the Atto tool and can take OS 9.1 but not OS X under any circumstances and I thought maybe XPostFacto is failing because the drives aren't formatted with Apple Drive setup. I use version 7.3.5(Patched) Thanks, Joe |
. |
RE: UL2D Cannot use Apple setup or Micronet |
December, 28, 2002 8:09 PM |
jcp171 |
. |
I have active termination on the cable, but do I need to put a jumper on the drive for Term power? I was told not to terminate both but I'm not sure... |
. |
RE: UL2D Cannot use Apple setup or Micronet |
December, 28, 2002 10:59 AM |
earlyd416 |
. |
Have you made sure that the SCSI id's are not the same? Do you have an Active Terminator plug in the last ribbon clable plug? Recall that LVD drives need an Active Termination. Dunno what else to tell you. --Dwight |
. |
RE: UL2D Cannot use Apple setup or Micronet |
December, 27, 2002 9:57 PM |
jcp171 |
. |
When I use drive setup on the OS 9.1 cd it is very odd. It sees both drives as the same drive??? ID 0 lists two volumes Atto Volume and Atto 2 ID 1 List the Same but ID 0 is really a volume called Atto X??? Any ideas here??? |