Kanga + ethernet |
February, 23, 2003 11:18 AM |
powderhaus |
We have a Kanga with 160MB ram and a all in one ethernet and modem port. I remember hearing a while back that ethernet is not supported, this is a problem if it still stands true, so does it? |
. |
RE: Kanga + ethernet |
February, 28, 2003 8:52 AM |
ivanxqz |
. |
I use a PCMCIA ethernet card on my 2400, so that could conceivably work with a Kanga as well (though it may need to be Cardbus-enabled, I can't remember if those machines supported Cardbus OOTB). I use a CompUSA house brand 10/100 32-bit (Cardbus) card, with drivers from http:// www.realtek.com.tw. It was all of $20, though its throughput is less than stellar. |
. |
RE: Kanga + ethernet |
February, 26, 2003 3:09 PM |
powderhaus |
. |
Thanks a lot, i guess i am the lucky one. This would be a question to help Curtis, will PCMCI cards with ethernet work? |
. |
RE: Kanga + ethernet |
February, 25, 2003 6:15 PM |
nick.ashton |
. |
The Kangas with integrated Ethernet and modem, support Ethernet in OS X. Those with Ethernet only do not (different chip). No change. |
. |
RE: Kanga + ethernet |
February, 25, 2003 1:32 PM |
curtis |
. |
Did you ever get an answer to this ? I have a Kanga with Ethernet only - not much point in trying to go to OS X if I can't get on to our network. Does anyone know if XPostFacto supports the ethernet only card on the Kanga ? Thanks |