Another failed USB 2.0 card |
June, 29, 2003 1:19 AM |
gabb |
I Just tried my fourth USB 2.0 card and it didn't work under 9.X, it doesn't even recognize the damn card. Under 10.X it works fine. I guess I will go back to USB 1.1 card (if i can find one). So far the only USB 2.0 card (well 9.X recognized the card atleast) worked was the Macally one (combo) but the FW card was crashing ... so i couldn't use that. the other three were generic ones. I know USB 2.0 won't work under 9.X but atleast recognize the card and work at USB 1.1 speed,...but no. I have downloaded the DDK stuff but i have to idea how to install it. Any suggestions ppl? Gabby |
. |
RE: Another failed USB 2.0 card |
July, 07, 2003 9:49 PM |
marcus_ck_lee |
. |
Hi Gabb, You can try Keyspan USB 2.0 PCI adapter. It says it is compatible with OS 8.6 and above. http://www.keyspan.com/products/usb/u2pci5/ Cheers, Marcus |
. |
RE: Another failed USB 2.0 card |
July, 06, 2003 10:09 PM |
gabb |
. |
Marc u want sell one? |
. |
RE: Another failed USB 2.0 card |
July, 06, 2003 3:55 PM |
marcush |
. |
If you want a generic usb 1.1 card for your PTP then I would suggest picking an ADS card. I have two that worked great in my PTP and Power Center Pro. |
. |
RE: Another failed USB 2.0 card |
July, 04, 2003 11:18 PM |
gabb |
. |
Thanks marc, I did invest on a Macally card ($70), it was a USB/ FW card. But like my older FW/ USB (1.1) card i was getting video capture crashes etc. even though I did get the USB(1.1/2.0) to work under 9.x and 10.X. I feel somehow these combo cards r not agreeing with my PTP. so I will stick to the generic FW card, now i just need a generic USB card to work with both 9.X and 10.X. |
. |
RE: Another failed USB 2.0 card |
July, 01, 2003 11:58 AM |
marcush |
. |
Get a Ratoc FW/USB2.0. I know you didn't want to spend that much but it will work flawlessly. Of the two generic FW/USB1.1 cards I tried (Datek and CompUSA) both had problems in my PTP. |
|
|