PB 3400 Install "stall" at OS X boot image |
August, 31, 2002 1:30 AM |
leonr2 |
Installed XPF on 3400c (2GB HD 144 RAM) and move thru install no problem until OS X stalls install stops at at boot image. Any suggestions? Have tried zapping PRAM, reformatting HD and reinstalled OS 9.2. |
. |
RE: PB 3400 Install |
September, 02, 2002 11:09 PM |
OSXGuru |
. |
Try booting in verbose mode. Ideally, set the input-device and output-device in the Open Firmware menu, and hold down command-v as the computer reboots. This should give you some kind of error message, rather than just a stall. Also, if you're trying to install Mac OS X 10.2, that just won't work yet, because 10.2 has a problem with the 603 processor (I'm trying to figure out exactly why, and fix it). |
|
|