usb/firewire in 7300 |
September, 14, 2002 3:05 PM |
shearm |
I've got a 7300 upgraded with sonnet g3-400 ive got a usb card in one pci slot, a radeon mac edition in another, and the third is empty when i put a simple firewire card in that third slot, osx locks up on bootup. any ideas why? this is the firewire card that came with my pinnacle studio for my pc |
. |
RE: usb/firewire in 7300 |
September, 16, 2002 11:33 PM |
alan |
. |
I have the adaptec USB/Firewire card installed with an Adaptec 29160 SCSI card, and an ATI Rage Orion, and my USB/firewire card works fine. |
. |
RE: usb/firewire in 7300 |
September, 15, 2002 2:46 AM |
mjoecups358 |
. |
Then try a different firewire card. I am using the Macally fw/usb combo card and it was completely plug and play. |
. |
RE: usb/firewire in 7300 |
September, 14, 2002 6:37 PM |
powderhaus |
. |
KEEP YOURSELF GROUNDED!!!!!!!!! |
. |
RE: usb/firewire in 7300 |
September, 14, 2002 6:36 PM |
powderhaus |
. |
i had the very same problem with my firewire/usb combo card and the firewire card (i dont know about a usb card) needs to be on the other side of the Radeon mac edition (i also have that). switch the firewire and usb cards if that does not work pull the usb card and if that workstry putting the radeon in the end slot. |