Get exclusive deals delivered to your inbox!Start saving today. »
Courtesy of OWC
Caution: Use at you OWN risk
Below is a list of jumper setting you can use on your BLUE AND WHITE G3 / G4 "Yikes" Motherboard. OWC recommends using extreme caution when attempting to overclock your ZIF processor.
Some indications of too high a clock speed are instability, crashing, video artifacts, no video, no start chime.
S = Jumper
x = NO Jumper
Note: Jumper #1 starts on the inside of the pin row.
(Facing toward the motherboard)
The most common settings have been boldfaced.