Experience local shipping options and optimized product inventory for your region.
Ta-DAH!!! It worked. My error was that I connected the USB cable before connecting power. This prevented the Setup program from appearing. Connecting the drive in this precise order solved the problem. (Never underestimate the importance of following the setup instructions exactly.)
Once the Setup icon is clicked, enter your password, then the Welcome screen appears.
While the unit will support up to 16 partitions each with a different size, plus partitions that support Windows and Linux, you will get the fastest performance from an SSD drive by configuring it as a single partition.
I recommend using the Easy Setup option
You next specify where you want the manuals to be stored.
Finally, confirm the initialization settings and click Setup. On this MacBook Pro, once it started, the entire setup process took about 15 seconds.
OPERATION
Once setup, the MEP looks and acts like any other hard drive/RAID. Another feature that I like is that when the computer goes to sleep, the MEP Dual Mini does, too.
"The Mercury Elite Pro Dual mini needs an active data signal to remain powered on. If it is disconnected from the computer, or if the computer goes to sleep or turns o , the device will power o . To minimize the total rebuild time, it is recommended to keep the device connected to the computer (with the computer powered on), and disable any hard drive sleep settings on the computer for the duration of the rebuild process." (User manual)
PERFORMANCE
However, as with any storage device, the proof is in the pudding. Is this thing fast enough to support video editing? Let's find out.
This version of the device is marketed as a 1 TB drive. After formatting, the usable capacity is 955.55 GB. (This loss in storage capacity is due to formatting and the differences between how engineers define a terabyte and how marketers do. This difference in capacity is normal and applies to all storage manufacturers.)
With four possible configurations, let's test each one to see what kind of performance it can deliver.
NOTE: Changing the configuration of this device erases all current data. So, it is important to think about how you want this setup before transferring data to it.
To change the system configuration:
Reconfiguration took about a minute from changing the switch to reformatting. However, reformatting using Disk Utility means that you replace the custom OWC drive icon with a standard hard drive icon.
NOTE: Starting with Mac OS 10.12, Disk Utility no longer creates RAID devices. However, since the RAID is created using a hardware RAID controller in the MEP Dual Mini, this is not a limitation.
RAID 0
With write speeds of 465 MB/second and reads of 846 MB/second, this has more than enough speed for most editing tasks.
For video editing, write speed is not as important as read speed. Analysis, rendering and exporting are, essentially, creating one video stream at a time. Even large codecs like Apple ProRes 4444 require write speeds far below 100 MB/second per stream.
So, while faster writes are nice, for example, it makes copying media faster, they are not essential.
Read speeds, on the other hand are essential. Multicam editing, larger frame sizes, extended bit-depth video, RAW and LOG files, even faster frame rates all require faster performance.
The read speed of this unit is fast enough, as you can see from the chart below the numbers, for everything up to 2K. And, should be fast enough for some 4K formats, provided they are converted into ProRes or Cineform codecs.
The read speed of this unit is fast enough, as you can see from the chart below the numbers, for everything up to 2K. And, should be fast enough for some 4K formats, provided they are converted into ProRes or Cineform codecs.
RAID 1
As expected a RAID 1 drive is about half as fast as RAID 0; it also has half the storage capacity. However, these speeds are more than sufficient for any DIT work. Even most HD editing tasks will be fine using RAID 1, with the added security knowing that if one of the two drives in the RAID dies, your data is still safe on the other one.
NOTE: Just for comparison, a FireWire 800 drive - which was state-of-the-art just a few years ago - maxed out at 85 MB/second. This speed was perfectly fine for SD and some HD editing.
SPANNED
Essentially, a spanned drive will have about the same speed as RAID 1 or an independent drive, as these test results illustrate.
This is the first device I've worked with that supported spanned drives. The big advantage to this format is that you can store HUGE files - larger than would fit on a single drive. You can also mix drive sizes and formats inside the unit.
The disadvantage is that the speed of a spanned drive is only as fast as the slowest device inside it.
INDEPENDENT DRIVES
The speed of each independent drive was essentially the same as a spanned drive or RAID 1.
Configuring this as two independent drives creates two drive icons on the desktop instead of one.
CONNECTING VIA USB-A
As an additional test, I connected this unit to a 2015 iMac, which does not have USB-C ports, using the USB-C to -A converter cable included in the box with the MEP Dual Mini.
As you can see, the speeds are extremely slow. While fine for moving data to and from the unit, these are too slow for an serious video editing.
REFORMATTED AS RAID 0
The last thing I checked, after going through all these configurations, was to see if there was any falloff in performance when the MEP was reset back to RAID 0. As you can see from the numbers, while there was a fall-off in write speed, the read speeds - which we need most for editing - remained consistently high.
NOTE: One thing that surprised me was that write speeds declined as the test repeated. The Blackmagic Disk Speed utility tests write speeds, then read speeds, then retests writes, then retests reads and so on until you stop the test. With each iteration, the write speeds slowed down a bit until they finally plateaued around 380 MB/second. As soon as the test was stopped and restarted, write performance jumped back up to its original levels.
From my perspective, these write speeds are PLENTY fast for most editing, even at the slower levels. So, while puzzling, this performance fall-off is not something I would worry about. But it is strange.
BUS POWERED
The last thing I wanted to check was whether the MEP could be powered directly from the USB-C bus of the new MacBook Pro. This would allow truly portable editing with large files because both the computer and hard drive could be powered from the computer's battery.
The answer is: "Yes." Running fully on battery power, there was no fall-off in performance.
NOTE: OWC, in their Quick Start Guide, writes: "It may be possible to bus-power this device when connected to a USB-C host, however, we recommend using the included power supply. This is especially true if you're using the included Standard-A to Type-C cable.
AN INTERVIEW TO LEARN MORE [Updated 12/20/16]
I always like chatting with manufacturers, as part of my review, to learn more about the unit than just how big and how fast. To this end, I had an email conversation with Ellyse Tate, product review specialist at OWC, to learn more.
Larry: Who is the target market?
Ellyse: USB has gone through weird phases. USB 3.1 Gen 1 is the same as what we used to call USB 3.0. It is backwards compatible with USB 2.0, but it has a maximum theoretical data rate of 5Gb/s. It comes standard as a Type A/B connection, but recently has become available with Type-C. USB 3.1 Gen 2 is the latest version of USB and can theoretically see speeds up to 10Gb/s. It comes standard as a Type-C connection. We've got a great Blog Article that goes into a lot of detail on this.
Larry: There are several different configurations of this product. Should editors decide which to buy solely on capacity?
Ellyse: Our Mercury Elite Pro Dual mini is available in seven different configurations (eight if you include the empty one), ranging from 240 GB (2x120 GB SSDs) up to 4.0 TB (2x2.0 TB HDDs). While capacity is important in deciding what unit to purchase, you also want to look at what the solution is being used for and what kind of speeds you are looking for.
If this is going to be a backup drive that you can just take with you places, one of the hard drive solutions is your best bet. If you're looking for something that you can run your computer off of or something that will be used for constant editing, you'll want to lean more towards an SSD solution to give you the best speeds possible. And if you're not 100% sure what you want, our award winning US-based customer service department can help you decide!
Larry: What were the design goals?
Product Development: The form factor and product concept are not brand new to us, we released an original version of this unit back in 2010. This rereleased version is nearly identical in the terms for form factor and assembly, however we did put the RAID selector on the outside of the enclosure this time for convenience as it was originally on the inside. We did opt to use USB 3.1 Gen 2 this time around though because it's a dual drive enclosure. Single-drive SATA based products cannot benefit from this newer version of USB because one SATA SSD only pushes up to 500 MB/s. Since our solution allows for two drives, the new generation of USB was used to provide the fastest speeds. We also wanted to come out with a portable device in order to take advantage of the benefits of USB's new power spec, allowing for 100% reliable bus-power. We then used the physical form factor because we've always received good feedback from customers on the convenience of the slim design, allowing it to easily slip into the pocket of a laptop bag or backpack.
Larry: When should an editor use RAID 0 vs RAID 1?
Tech Support: You would use a RAID 0 over a RAID 1 when speed is your most important factor and redundancy has otherwise been taken care of. RAID 0 gives you no backup, if one drive fails you have lost all of your work, so you do need to make sure that you've got a backup somewhere else. However, it gives you the speed you would not otherwise be able to have with a RAID 1.
Larry: Why pick USB over Thunderbolt?
Tech Support: The 10Gb/s speed you see with USB 3.1 Gen 2 is the same speed you will see with the original Thunderbolt, while Thunderbolt 2 is 20Gb/s and the latest Thunderbolt 3 provides 40Gb/s. So while Thunderbolt clearly sounds like the winner when it comes to speed, you have to consider what you're actually using to get those speeds. A Dual Drive SATA enclosure, like our MEP Dual Mini, can only utilize the speeds of two drives which limits you to around 800 MB/s. If the drives can only go that fast, the extra speed from Thunderbolt is being wasted. If you're looking for a solution that you can Daisy Chain or one with 3+ drive bays, Thunderbolt is going to be your friend. But for a 1-2 bay enclosure, you're going to spend much less money on a USB solution that will give you the same performance as Thunderbolt. An added benefit of USB? It's native on almost all computers currently on the market, while Thunderbolt is still warming up.
Larry: If you were to write a one-paragraph commercial for this unit, what would it be?
Ellyse: The Mercury Elite Pro Dual mini is a high-performance portable RAID for creative professionals who need worry-free, uncompromising storage on-the-go. Mercury Elite Pro Dual mini features fast USB 3.1 (10 Gb/s) Type-C connectivity, making it compatible with computers featuring Thunderbolt 3 and USB 3.1 Gen 2 ports. It delivers blistering 738MB/s RAID 0 speeds to accelerate creative workflows in the field and on the move, or is easily configured in RAID 1 for immediate data redundancy wherever you are. Available up to 4TB with a slim design and rugged aluminum enclosure, Mercury Elite Pro Dual mini is powerful, high-capacity storage that easily fits in your gear bag. Plus, it's bus-powered by virtually any USB 3.1 or Thunderbolt 3 port. For creative professionals working remotely, or for anyone who needs a compact redundant backup, Mercury Elite Pro Dual mini is the perfect professional RAID.
SUMMARY
If you are someone who is traveling a lot, storing media on an SSD means that your drives can handle far more abuse and rough handling than spinning media, without damage to your gear or your files.
The light weight, small size, high speed and configuration flexibility of the Mercury Elite Pro Dual Mini, combined with its ability run directly off the battery of the computer make it very attractive for all HD, 2K and some 4K editing provided you have a computer with a USB-C port. Connecting via USB-A results in extremely slow speeds.
The only places where this would be underpowered would be multicam editing with more than ten cameras, editing 2K or 4K files at more than 10-bit depth or 4K stereoscopic 3D images.
For most editors who need fast, rugged, on-the-go storage, the Mercury Elite Pro Dual Mini can be an inexpensive and high-performance addition to their toolkit.