Full Size Impact X-orbing Screen Armor for iPad Air
Full Size Design
This NuGuard KXs screen protector for iPad Air was designed to protect from top-to-bottom and side-to-side across the entire screen.
Triple Layer X-Orbing Protection
Versatile protection keeps your iPad's screen looking like new. Three separate layers combine into one ultra-thin, 0.28mm thick protective shield with advanced energy x-orbing technology to help prevent damage from impacts and scratches while not affecting the screen's touch sensitivity or clarity.
This crystal clear coating is Retina display friendly and keeps dust and dirt away from the screen
with no image distortion, yellowing or hazing over time.
This military-grade kinetic energy x-orbing protection layer is hammer-hit tough with a "3H" hardness scale rating,
and can also self-heal from minor impact dents.
This self-adhesive layer requires no water or other liquids to install and provides a bubble-free look
with no sticky residue if removed or repositioned.
Includes lint free cloth, adhesive dust removal tool, and application tool
The NewerTech NuGuard KXs is compatible with...
Model ID: iPad4,1; iPad4,2
16GB, 32GB, 64GB, 128GB
iPad Air 2
Model ID: iPad5,3; iPad5,4
16GB, 64GB, 128GB
Step 1. Make sure there are no fans blowing in the room and let any dust settle from people movement for five minutes before starting the project.
Step 2. Begin preparing your screen surface using the included lint free wipe. Remove all fingerprints, dust, and oils.
Step 3. Make sure you have the included straight edge plastic tool to help apply the protector.
Step 4. Start applying the protective film at the home button end of the device and gently work from that bottom upwards making sure you have everything straight. DO NOT peel the protective film from the sheet it comes shipped on until it's near the edge of the surface of the glass. That keeps any contaminants from statically clinging to the screen protector. The protector will lay itself down and adhere to the screen easily.
Step 5. Work any bubbles from the center to the edge using the included straight edge tool.
Step 6. Take care not to create any fingerprints on the edge of the protective film by not touching that surface edge.
Step 7. If you have any dust under the screen, use the included blue sticky sheet to remove them. If you do have dust to remove, you should use a piece of tape to help lift the screen protector off of the device. Don't use your fingernails, as you can separate the multiple layers of screen protector accidentally.