DIY Bundle
1.0TB OWC 6G SSD
and OWC Accelsior S
Mac / PC / PCIe
Mercury Electra® 6G and Accelsior S
An SSD for your PCIe Slot
Give your Mac Pro tower or PC a 6G performance boost
The OWC 6G SSD and OWC Accelsior S DIY bundle is the simple solution to add a high speed SATA 6G drive to PCs or silver Mac Pro towers otherwise restricted to 3G architecture. Combined with the high-performance Mercury Electra SSD, Accelsior S brings cutting edge 6G performance to your SATA 3G system.
High-performance storage
Delivering the latest in flash NAND and controller technology, utilizing SLC and 3D NAND for long-lasting, power-efficient performance, the OWC Mercury 6G SSD line offer a powerful combination of performance and reliability for demanding everyday computer users.
Internal storage expansion at lightning speed
With more than 500 MB/s of throughput, the Accelsior S dual-lane PCIe 2.0 card delivers flexible storage expansion – with a speed boost – to your Mac or PC. Accelsior S is the perfect complement to OWC's Mercury family of high-performance SSD's, allowing up to an extra 1TB of fast storage expansion.
With no drivers or extra software needed, upgrading your Mac Pro or PC tower with a Mercury Extreme Pro and Accelsior S is a breeze.
With no drivers or extra software needed, upgrading your Mac Pro or PC tower with a Mercury Extreme Pro and Accelsior S is a breeze.
1.0TB Mercury Electra 6G SSD Specifications:
Specifications
Form Factor
Standard 7mm 2.5"
Interface
SATA 6.0 Gb/s
Capacity 1
1000GB Useable Capacity
Total Flash Memory Components: 1024GB
24GB Allocated to real-time data redundancy and error correction
Total Flash Memory Components: 1024GB
24GB Allocated to real-time data redundancy and error correction
Formatted Capacity1
931 GiB
RAID Support
Yes
SMART Attributes
Standard 2
Native Command Queuing
Up to 32 simultaneous commands
RoHS Compliant
Yes
Reach Certification
Yes
Format
Unformatted (Instructions on formatting here)
Physical
Height (max)
7 mm (0.276 in)
Width (max)
70.06 mm (2.758 in)
Length (max)
100.12 mm (3.941 in)
Weight
60.0 g (0.13 lbs)
Reliability
MTBF (Mean Time Between Failures)
1,500,000 hours
Security
ATA Security Feature Command Set and Password Login Support
Error Correction
Built-in ECC
TRIM Support
OS Dependent
Wear Leveling
Supported
Nonrecoverable Read Errors
Less than 1 sector per 1015 bits read
Compatibility
Mac OS Compatibility
Yes
PC OS Compatibility
Yes
Other Requirements
Requires a Mac, PC, or drive enclosure with an available SATA drive bay. SATA III (6.0 Gb/s) required for best performance.
Performance
Average Access Time
<0.1 ms
Sequential Read (Max)
532MB/s
Sequential Write (Max)
467MB/s
Power
Read Mode (Max)
2.1W
Write Mode (Max)
2.1W
Seek Mode (Max)
2.1W
Idle Mode (Max)
0.1W
Environmental (Operating)
Shock
1500 G max at 0.5 ms
Temperature (°F)
32°F to 158°F
Temperature (°C)
0°C to 70°C
Humidity
5% to 95% non-condensing
Environmental (Non-Operating)
Shock
1500 G max at 0.5 ms
Temperature (°F)
-40°F to 185°F
Temperature (°C)
-40°C to 85°C
Acoustics
Idle (Typical)
0.0 bels
Seek (Typical)
0.0 bels
- 1GB = 1,000,000,000 bytes. Total accessible capacity varies depending upon operating environment (typically 5-10% less). The actual total capacity will depend on your own defined file settings/preferences.
- Temperature reporting is currently an unsupported feature because due to the operating characteristics of SSDs, it is highly unlikely one would ever exceed an OWC Mercury SSD's stated operating temperature ceiling of 158F/70C. However, we are looking into supporting this feature in the future via a firmware update. Firmware updates can be found here: http://eshop.macsales.com/tech_center/OWC/SSD.
Accelsior S Specifications:
OWC Part Number
- OWCSSDACL6G.S
Form Factor
- Half height, half length
HBA controller
- Asmedia 1062
Interface
- PCIe 2.0 x2
SMART Attributes
- Depends on mechanism installed
AHCI Compliant
- Yes – Plug and Play installation, no drivers required
OS compatibility
- Mac OS X 10.6 and up
- Windows Server 2008 and higher
- Not compatible as a Windows boot drive on a Mac
Supported mechanisms
- All 2.5" HDD and SSD SATA 1.5, 3.0, 6.0Gb/s
Performance
- Read: up to 550MB/s – this depends on mechanism installed
- Write: 530MB/s – this depends on mechanism installed
RoHS Compliant
- Yes
Acoustics
- 0.0 bels for both Idle and Seek
Environment
- Environmental (Operating)
- Temperature (°F) 32° — 158°
- Temperature (°C) 0° — 70°
- Environmental (Non-Operating)
- Temperature (°F) −40° — 185°
- Temperature (°C) −40° — 85°
Gallery
Video
Note about throughput:
- PC Throughput:
- PCIe 2.0 x4 slot or better is required. Use of a PCIe 1.0 x4 slot will reduce performance.
- Mac Pro Throughput:
- 2009-2010 Mac Pro. Installing Accelsior S into any open x4 or x16 PCIe 2.0 slot will deliver full throughput
- 2008 Mac Pro. These models have two x16 PCIe 2.0 slots, which enable Acceslsior S to deliver full throughput. Installing Accelsior S into of the two x4 PCIe 1.0 slots will result in Accelsior S being addressed as a gen one, one-lane card with performance limited to real world 190-200MB/s data rates.
- 2006-2007 Mac Pro. These models utilize PCIe 1.0 slot which cannot be configured (even with the Expansion Utility in OS X) to address Accelsior S as anything but as a first generation one-lane card. As a result, Accelsior S performance will be limited to 190-200MB/s data rates. If maximum data rate speedis desired, we recommend the installation of a 2.5" OWC Mercury SSD in an open Mac Pro drive bay.
This OWC SSD is compatible with: Learn how to find your Mac's model ID
Mac Pro 12-Core (Mid 2012)
(June, 2012)
Model ID: MacPro5,1
2.4GHz, 2.66GHz, 3.06GHz
Mac Pro 4-Core (Mid 2010)
(July, 2010)
Model ID: MacPro5,1
2.8GHz, 3.2GHz
Mac Pro 12-Core (Mid 2010)
(July, 2010)
Model ID: MacPro5,1
2.66GHz, 2.93GHz
Mac Pro 8-Core (Early 2009)
(March, 2009)
Model ID: MacPro4,1
2.26GHz, 2.66GHz, 2.93GHz
Mac Pro 4-Core (Early 2009)
(March, 2009)
Model ID: MacPro4,1
2.66GHz, 2.93GHz, 3.33GHz
Mac Pro 8-Core (Early 2008)
(January, 2008)
Model ID: MacPro3,1
2.8GHz, 3.0GHz, 3.2GHz
Mac Pro 4-Core (Early 2008)
(January, 2008)
Model ID: MacPro3,1
2.8GHz
Mac Pro 4-core (Mid 2006)
(August, 2006)
Model ID: MacPro1,1
2.0GHz, 2.66GHz, 3.0GHz
Xserve (Late 2006)
(August, 2006)
Model ID: Xserve1,1
dual 2.0GHz, dual 2.66GHz, dual 3.0GHz
Xserve (Early 2008)
(January, 2008)
Model ID: Xserve2,1
2.8GHz, dual 2.8GHz, dual 3.0GHz
Xserve 8-Core (Early 2009)
(April, 2009)
Model ID: Xserve3,1
2.26GHz, 2.66GHz, 2.93GHz
PC Desktops
Compatible with Intel / AMD Process based PCs capable with
the specifications listed above.
PCIe capable servers
Compatible with PCIe expandable servers with the specifications listed above.
NOT COMPATIBLE
HP DL 380 G7
HP DL 380 G8
HP DL 380 G7
HP DL 380 G8
NOT COMPATIBLE
Dell PowerEdge R620
Dell PowerEdge R620
NOT COMPATIBLE
Dell PowerEdge T620
Dell PowerEdge T620
Includes
- (1) Mercury Electra 6G SSD
- (1) Accelsior S PCIe to 2.5" 6Gb/s SATA SSD Host Adapter
- OWC Accelsior S Quick Start Guide
Warranty
The best warranty is one you never have to use - but should the need occur - we're proud to provide a superior level of support and service coverage to our customers.3 Year OWC SSD Limited Warranty
3 Year OWC Limited Warranty
Even when not used, we understand the peace of mind afforded by a longer warranty period. OWC's industry leading coverage is a testament to our confidence in the reliability of the solutions that we offer. OWC solutions are engineered to demanding quality standards in order to deliver the most reliable, highest performance available on the market in each storage category.
Customer Ratings
DIY Bundle
1.0TB OWC 6G SSD
and OWC Accelsior S
Mfr P/N: SSDACL6GE1TB
OWC SKU: OWCSSDACL6GE1TB
DIY kit includes a Mercury Electra 6G SSD and Accelsior S for installation in a PCIe Slot
3 Year OWC Limited Warranty
Ships: Same Day
Only $199.98Cyber Saver
$164.75
Add to Cart
Additional Capacities & Kits:
6G SATA Storage Expansion
- Card Only
- Ships: Same Day
- Only $49.99
- Cyber Saver $44.99
Recommended Items:
