OWC U2 ShuttleOne
NVMe M.2 to 2.5-inch U.2 SSD Adapter
Mfr P/N: U2SHTLONE OWC SKU: OWCU2SHTLONE
Premium, heat-dissipating adapter converts an NVMe M.2 SSD into a swappable U.2 SSD
- Flexible: easily install an NVMe M.2 SSD in minutes
- Swappable: protects your SSD connector from wear
- Unlimited: supports the highest speed your SSD can deliver
- Beyond Fast: fully PCIe Gen 1-4 certified for today’s and tomorrow’s SSDs, up to 8,000MB/s
- Broad Compatibility: use in 2.5-inch NVMe U.2 drive bays, OWC Mercury Helios 3S equipped with U.2 NVMe Interchange System, OWC ThunderBay Flex 8, and OWC Flex 1U4
- Optimum Cooling: full metal housing keeps drive running cool and throttle-free
- 3 Year OWC Limited Warranty
Build Your Own Affordable High-Performance U.2 SSD
Full Metal for Full Reliability
Swap at Will
Beyond Fast
- Select SSDs have been tested by OWC and shown to be incompatible with Mac systems running macOS 10.14 'Mojave' and later regardless of how they are connected to the host computer. Please consult the article "Incompatible SSD List: macOS 10.14 'Mojave' and Later" for a list of affected SSDs.
Includes
- (1) OWC U2 ShuttleOne NVMe M.2 to 2.5-inch U.2 SSD Adapter
- (1) Quick Start Guide for OWC U2 ShuttleOne
- (1) Assembly Manual & User Guide for OWC U2 ShuttleOne
- 3 Year OWC Limited Warranty
Specs
Drive Bays
- 1 bay supporting: M.2 drives
- Supports NVMe M.2 SSDs with 2230, 2242, 2260, and 2280 form factor and "M Key" connector type. Single- and double-sided SSDs are supported.
- NVMe SSDs with a heatsink will not fit and are not supported.
Form Factor
- 2.5-inch U.2 (SFF-8639)
Drive Interface
- PCIe 4.0 x4
Mac OS Compatibility
- Requires additional hardware, please see the 'Other Requirements' section for more details.
PC OS Compatibility
- Varies by host device
Other Requirements
- Requires a NVMe (PCIe) enabled U.2 backplane/connector on a host system or enclosure such as OWC ThunderBay Flex 8 (top 4 bays only, top-left recommended), OWC Flex 1U4, OWC Mercury Helios 3S with U.2 NVMe Interchange System.
Dimensions
- Height: 0.9 cm (0.4 in)
- Length: 10.1 cm (4.0 in)
- Width: 7.0 cm (2.8 in)
Humidity
- Operating: 5% to 95% non-condensing
- Non-Operating: 5% to 95% non-condensing
- NVMe SSDs with a heatsink will not fit and are not supported.
Compatibility & Installation Videos
PC Compatible

Products



Videos
M.2 SSD Install Video
Learn More
Customer Reviews
everything was fine. thanks.
I would recommend this product to a friend!
- Reviewer:Reviewer744438145
Thank you so much for your fantastic review! We're thrilled to hear that everything was fine with your experience. Your satisfaction means the world to us, and we can't wait to assist you again in the future! Don't hesitate to contact us with further questions, comments, or concerns. https://eshop.macsales.com/Service/
I have not had a chance to really shake it down yet. This drive will be used with a MacStudio and MOTU Digital Performer 11 to record 16+ multitrack audio, so it should do well. It's nicely tucked in behind left side monitor. Tests are looking good for capture and fast editing~
I would recommend this product to a friend!
- Reviewer:dave-97228
Thank you so much for your amazing review! We're thrilled to hear that you're having a great experience so far with your new drive. It sounds like a fantastic setup with your MacStudio and MOTU Digital Performer 11 for multitrack audio recording! Please feel free to contact us if you have any further questions, comments, or concerns. https://eshop.macsales.com/Service/
For the piece these M.2 holders do a good job. They are well-constructed and nicely made. My one complaint is that the internal screw that holds the M.2 drive was so tightly installed that it was a real struggle to loosen it to install the M.2 blade. Almost to the point of stripping the screw. I have 4 ShuttleOne’s and this problem existed with 3 of the 4.
I would recommend this product to a friend!
- Reviewer:Reviewer14471886
Thank you so much for your review! We're thrilled to hear that you find our M.2 holders well-constructed and nicely made. We truly appreciate your feedback regarding the internal screw, as it helps us improve our products. Your experience with three out of four units is valuable information that we can use to enhance our design and manufacturing process. We're dedicated to providing the best possible experience, and your insights are crucial in helping us achieve that. Thank you again for sharing your thoughts!