OWC Thunderbolt 5 Dual 10GbE Network Dock Driver

Support Article

Jump to a Topic
Jump to a Topic
1 of 4 matches

Relevant Part Numbers

  • OWCTB5DK11PD210G

Instructions

  • The OWC Thunderbolt 5 Dual 10GbE Network Dock has three ethernet ports. Two different chipsets are used based on the ethernet port. Windows & Linux users require a driver download and installation for each individual chipset.
    • NOTE: Ethernet-compatible hardware components and cabling rated for 2.5Gb/s (Cat 5e cable minimum, Cat 6 or later strongly recommended) are required to ensure optimal 2.5GbE performance.
      • 10GbE Ethernet Port chipset: Marvell (AQC113)
      • 2.5GbE Ethernet Port chipset: Realtek (RTL8156BG)

Marvell Driver Download Instructions

1. Downloaded the required driver by visiting Marvel Public Driver Downloads.

2. Filter the available drivers by selecting the following for the available sections:

  • Category: Marvell Public Drivers
  • Platform: Windows or Linux
  • Part Number: AQC113

3. Locate and download the appropriate "Marvell AQtion Driver" from the listed available options.

  • NOTE: The "Marvell AQtion Firmware Updater Utility" is not required and should not be downloaded.

4. Access the downloaded driver folder and launch the Marvell AQtion Installer.

  • Chipset: Marvell (AQC113)

Realtek Driver Download Instructions

  1. Visit Realtek Driver Support and download the appropriate driver based on the operating system version currently in use.
  2. Complete the on-screen instructions provided by the download to complete the driver installation.
    • Chipset: Realtek (RTL8156BG)

    Free Support Chat

    Our free award-winning support team is ready to answer all of your questions. Technical support is available Monday - Friday: 9AM - 6PM. Customer Support & Sales is available Monday - Friday: 9AM - 6PM. Support is unavailable on U.S. Federal holidays. Talk to a human today.