X

Send us a Topic or Tip

Have a suggestion for the blog? Perhaps a topic you'd like us to write about? If so, we'd love to hear from you! Fancy yourself a writer and have a tech tip, handy computer trick, or "how to" to share? Let us know what you'd like to contribute!

Thanks for reaching out!

Tips from the Rocket Yard: Fitting a 7mm Drive in an Older 2.5” Enclosure

If you have recently updated an older 2.5” enclosure with a 7mm drive, you might have noticed that the drive can seem a bit loose and potentially rattle during use.

While the drive will still power up and work exactly as it is intended to, there is a measure that can be taken to help with the light rattling that might be caused by enclosures built with 9.5mm drives in mind.

Check out OWC Chris R.’s Rocket Yard video guide to see how you can secure a 7mm drive in a 9.5mm enclosure with foam tape and make sure your drive has a snug fit. It should be noted that many enclosures include foam tape for accommodating a 7mm drive.

Get more: Be sure to check out all of our tech tips and video guides at the Rocket Yard!

Be Sociable, Share This Post!

Leave a Reply

Comment

Name